JUKI ACF-172-1790 Instruction Manual page 87

NO.
Knife cylinder lowering time (Optional)
Y-feed motor origin compensation
Needle-rocking motor origin
compensation
Presser lifter motor origin compensation
Thread trimming on the way in continuous stitching
Permitted/ Prohibited.
In case of prohibited, jump feed setting becomes invalid, and the
registered pattern is sewn at the same position. Then
multi-sewing is possible.
Changeover of cloth cutting knife return
power
This item sets output power at the time of
returning the cloth cutting knife As set value is
increased, power of return knife becomes more
stronger.
Release amount of bobbin thread
trimmer at the start of sewing
this item sets the amount of releasing the
bobbin thread trimmer at the start of sewing.
Presser lifter speed selection
As set value is increased, presser lifting speed
becomes faster.
Item
: Permitt
Setting
range
-100 ～ 10 1 pulse
: Prohibit
86
Edit unit
5 ～ 300 5ms
1 pulse
-120 ～
(0.025
400
mm)
1 pulse
-10 ～ 10
(0.05
mm)
(0.05
mm)
--- ---
0 ～ 3 1
1 pulse
1 ～ 15
1 ～ 3 1
Initial
display
70
0
0
0
Permitte
d
0
8
1