JUKI ACF-172-1790 Instruction Manual page 91

[ Removing procedure ]
① Open the smart media cover, push the card until it goes no further, and ease up force
when it goes to the end. The card returns by approximately 10 mm in the reverse order
of the time of setting.
② Then draw out the card to complete removing.
[ Performing format ]
In case of re-formating the smart media, be sure to perform it with IP200. The smart media
formated with the personal computer cannot be read with IP200.
① Display the smart media format screen.
When MODE key
seconds, SMART MEDIA FORMAT button
(A) is displayed on the screen. When this
button is pressed, the smart media format
screen is displayed.
is held pressed for three
A
90