JUKI ACF-172-1790 Instruction Manual page 51

NO.
Double stitching cross selection
This item selects overlapped stitching or cross stitching at
the needle entry of parallel section when setting double
stitching.
:Overlapped
Compensation of double stitching width
This item sets amount to narrow overedging
width of 1st cycle when setting double stitching.
Number of times of basting
This item sets number of times of basting.
: Without basting
Basting pitch
This item sets pitch at the time of performing
basting.
Rolling length of basting
This item sets rolling length of needle thread
when performing basting.
Rolling pitch of basting
This item sets rolling pitch of needle thread
when performing basting.
Rolling width of basting
This item sets rolling width of needle thread
when performing basting.
Lengthwise compensation of needle entry
of basting
This item sets the amount to move needle entry
position back and forth when performing
basting more than two cycles.
Item
stitching
: 1 to 9 times
Setting
range
---
:Cross
stitching
0.0～2.0
0～9
1.0～5.0
2.0～20.0
0.2～5.0
0.0～4.0
0.0～2.5
50
Edit unit Remarks
--- ※３
0.1mm ※３
1 回 ---
0.1mm ※３
0.1mm ※３
0.1mm ※３
0.1mm ※３
0.1mm ※２、※３