JUKI ACF-172-1790 Instruction Manual page 48

NO.
Knife groove width, left
This item sets the clearance between cloth
cutting knife and left parallel section.
Overedging width, left
This item sets the overedging width of left
parallel section.
Ratio of right and left shapes
This item sets enlargement/reduction ratio of
right side shape making the knife position as
the center.
Pitch at parallel section
This item sets sewing pitch of left and right
parallel sections.
2nd bar-tacking length
This item sets length of bar-tacking on the
front side.
2nd bar-tacking length
This item sets length of bar-tacking on the
front side.
Square Straight
type, bar-tack,
bottom bottom
1st bar-tacking length
This item sets length of bar-tacking on the rear
side。
Square
type, top
Compensation of bar-tacking width,
right
This item adjusts left side outer shape of
bar-tacking section in terms of overedging
section.
Both 1st and 2nd bar-tacking can be
compensated.
Square
Square
type, top
type,
bottom
Compensation of bar-tacking width, left
This item adjusts left side outer shape of
bar-tacking in terms of overedging section.
Item
Flow,
bottom
Straight
bar-tack,
bottom
47
Setting
Edit unit
range
-2.00～2.00
0.05mm
-2.00～2.00 0.05mm
0.10～5.00
0.05mm
50～150
1%
0.200～2.500 0.025mm
0.2～5.0
0.1mm
0.2～5.0 0.1mm
-1.00～1.00 0.05mm
-1.00～1.00 0.05mm
Remarks
---
---
---
---
---
---
---
---
---