JUKI ACF-172-1790 Instruction Manual page 121

Error code
Ｅ４１０
Ｅ４７８
Ｅ４７９
Ｅ４８６
Ｅ４８７
Ｅ４８８
Ｅ４８９
Ｅ４９２
Ｅ４９３
Description of error
When sewing counter set value is smaller than
the number of times of sewing of the sewing
pattern which is selected at present.
Carriage movable range over error, left
Feed amount of sewing pattern is over the
movable range of carriage (left side).
set the jump feed amount and sewing length so
that the left traveling amount of carriage is
within 25 mm.
Carriage movable range over error (right)
Feed amount of sewing pattern is over the
movable range of carriage (right side).
Set the jump feed amount and sewing length so
that the right traveling amount of carriage is
within 610 mm.
Eyelet knife length error
When the shape is not formed since the eyelet
knife length is too short in case of eyelet shape.
Eyelet shape length error
Eyelet shape length is too short to form the
shape in case of eyelet shape.
Flow bar-tacking compensation error
When bar-tacking length is too short to form
the shape in case of flow bar-tacking shape.
Knife size error (at the time of plural motions of
knife)
When knife size is larger than cloth cutting
knife size.
Presser size over of basting
When stitching data of basting exceeds presser
size.
Presser size over of tie stitching at sewing end
When stitching data of tie stitching at sewing
end exceeds presser size.
120
How to Place of
recover recovery
Possible to
ACF data
re-start
input screen
after reset.
Possible to
ACF data
re-start
input screen
after reset.
Possible to
ACF data
re-start
input screen
after reset.
Possible to Sewing data
re-start input screen
after reset.
Possible to Sewing data
re-start input
after reset. screen
Possible to Sewing data
re-start input
screen
after reset.
Possible to Sewing data
re-start input
after reset. screen
Possible to Sewing data
re-start input
after reset. screen
Possible to Sewing data
re-start input
after reset. screen