JUKI ACF-172-1790 Instruction Manual page 108

⑥ Stop the count.
Display the production control screen referring to
Observing the production control information,p.102.
When the count is being performed, STOP button
(H) is displayed. When STOP button
the count is stopped.
After the stop, START button is displayed at the position
of STOP button. When continuing the count, press START
button again. The counted value is not cleared until
CLEAR button is pressed.
⑦ Clear the counted value.
When clearing the counted value, set the count to
the stop state and press CLEAR button
The value to be cleared is the present target value
(J) and actual results value (K) only.
（ Note : CLEAR button is displayed only in case of
stop state. ）
When CLEAR button (I) is pressed, the clear
confirmation screen is displayed.
When CLEAR button
clear confirmation screen. the counted value is
cleared.
(H) is pressed,
(I).
(L) is pressed in the
107
3-2-4.
J
K
H
I
L