JUKI ACF-172-1790 Instruction Manual page 43

⑤ Select the 1st bar-tacking shape.
Select the shape you desire to sew from among
5 kinds of the 1st bar-tacking shape buttons (F).
When it is selected, the total sewing shape in
which the 1st bar-tacking shape is used is
displayed.
⑥ Select the sewing shape.
Select SEWING SHAPE button (G) you desire to sew.
⑦ Finish the selection of sewing shape.
Press ENTER button
of the shape. Then the sewing shape which has been
selected is displayed in the LBH data input screen
(blue). The initial value of sewing data is inputted
according to the selected sewing shape.
Note) Number of sewing shapes to be displayed
changes according to the level selected in the
sewing shape selection level of memory switch data
(level 2).
→ Refer to 2-17. CHANGING MEMORY
SWITCH DATA,p.78.
(H) to finish the selection
42
F
G
H