JUKI ACF-172-1790 Instruction Manual page 101

The same information as that in the normal maintenance
and inspection information screen is displayed in the
maintenance and inspection information screen.
When button (E) of the item you desire to change the
inspection time is pressed, the inspection time input
screen is displayed.
③ Input the inspection time.
Input the inspection time.
When the inspection time is set to "0", the warning
function stops.
When clear button
the initial value. The initial values of the inspection time of
respective items are as follows.
・ Needle replacement : 0 (1,000 stitches)
・ Cleaning time : 0 (hour)
・ Oil replacement time : 200 (hour)
When ENTER
value is determined.
(F) is pressed, the value returns to
(G) button is pressed, the inputted
100
E
F
G