Trial Sewing Function; Performing Trial Sewing - JUKI ACF-172-1790 Instruction Manual

3-3. TRIAL SEWING FUNCTION

Data created with PM-1 (sewing data creation and edit software) can be sewn on trial by on-line
connection of the personal computer with the sewing machine.
Connect the personal computer with IP200 and transmit data to the sewing machine after
creation of data with PM-1. When IP200 becomes the data input screen, automatically the trial
sewing screen is displayed. For the operating procedure of PM-1, see HELP of PM-1 or the like.

3-3-1. Performing trial sewing

① Performing trial sewing
When the trial sewing data (vector format
data) is transmitted from PM-1, the screen on
the right side is displayed, and the needle entry
diagram of the transmitted data is displayed in
the center of the screen.
The display color of the needle entry diagram is
different according to the thread tension value.
When the number of stitches of the transmitted
data is excessive, the needle entry diagram is
not displayed.
② Edit the vector parameter.
Sewing can be performed by adding the vector parameter which can be set by the sewing machine
to the vector format data transmitted from PM-1. When sewing data setting button
pressed, the vector parameter edit screen is displayed. When setting is not performed, the vector
parameter becomes the initial value.
ＰＭ－１
Transmit
A
111
Ｉ Ｐ ２ ０ ０
(A) is