Setting The Rack2-Filer Options - Fujitsu PFU Rack2-Filer User Manual

6.31 Setting the Rack2-Filer Options

The following settings can be configured:
• [LibRoot Folders] tab
A LibRoot folder (for storing libraries, cabinets and binders) can be
specified.
By default, the folder specified at installation is set.
• [ScanSnap -> Rack2] tab
The destination where ScanSnap (including ScanSnap Organizer)
should send data to can be specified.
Data can be stored in either of the following destinations:
- WorkArea
- The binder currently specified in the Rack2-Filer window
- A binder selected in the [Binder Selection] dialog box
Even if Rack2-Filer is not open, data can be imported.
Rack2-Filer User's Guide
| 149