Fujitsu PFU Rack2-Filer User Manual page 413

[Problem]
File cannot be imported.
The application that created the target file is still running.
Exit the application before importing the file.
[Problem]
The files are imported too slowly.
Perform either of the steps below in the Rack2-Viewer window.
• Set the "Page Resolution" to a lower resolution (200 dpi
recommended) in the [Page Insertion] tab of the [Rack2-Viewer
Settings] dialog box.
• Set the "Color Data" to "Convert to B&W" in the [Page Insertion]
tab of the [Rack2-Viewer Settings] dialog box.
[Problem]
Color images are created while importing files, even through "Color Data" is
set to "Convert to B&W" in the [Rack2-Viewer Settings] dialog box.
In the [Rack2-Viewer Settings] dialog box, the settings of "Color Data"
and "Page Resolution" in the [Page Insertion] tab are valid only for
image conversion and file import (for files other than PDF files that are
created using ScanSnap).
[Problem]
When a file is imported, the "Raku2 ImageWriter is processing job. Please
wait until the job is completed, and try again." message appears.
If the file is already being imported with another binder, stop that
importing process, and then try again.
If an error appears if the file is not imported with another binder, Raku2
ImageWriter may not have closed normally. Restart the system.
If the error message appears again, there may be an error with the
Rack2-Viewer installation.
Re-install Rack2-Filer.
Rack2-Filer User's Guide
| 413