Fujitsu PFU Rack2-Filer User Manual page 349

1.
Insert a photo or paper document (such as a brochure) into
ScanSnap.
2.
Open the page of the photo binder to which you want to
import the photo/document.
Setting a default layout before importing photos or documents
eliminates the need to change the layout after importing them.
For details about setting a default layout, refer to "
default layout" (Page 355).
3.
With the Rack2-Viewer window displayed as the front
window on screen, press the scan button on the ScanSnap
device.
Scanning starts and the photo or paper document (such as a brochure)
is added to the binder.
After importing a photo or paper document (such as a brochure) to a photo
binder, you can edit the binder pages by adding comments to the photo and
document and changing the display size and position of the photo and
document. To create a photo album, refer to " Editing a page" (Page 351).
When using ScanSnap S1100, press the scan button
again after all documents have been scanned to end
scanning and add the photo or paper document (such as
a brochure) to the binder.
Setting a
Rack2-Filer User's Guide
| 349