Fujitsu PFU Rack2-Filer User Manual page 415

[Problem]
When a PDF file is imported, part of the file is not imported.
If the length of the imported PDF file is greater than the length of an A4
sheet, the part of the file not within the A4 size may be left out.
To import a PDF file longer than A4 size, import according to the
following procedure.
1. Open a PDF file in Adobe Acrobat or Adobe Reader.
2. From the [File] menu, select [Print].
3. In the "Page Handling" area on the print screen, select the
"Choose Paper Source by PDF page size" checkbox.
4. Print, and save the settings.
5. Close Acrobat or Adobe Reader, and re-import the PDF file.
If part of the file is still not imported using the procedure described
above, import according to the following procedure.
1. Open a PDF file in Adobe Acrobat or Adobe Reader.
2. From the [File] menu, select [Print].
3. In the "Page Handling" area on the print screen, select "Fit to
Printable Area" in "Page Scaling" and select the "Choose Paper
Source by PDF page size" checkbox.
4. Print, and save the settings.
5. From the [File] menu, select [Close].
Keep Adobe Acrobat or Adobe Reader running.
6. Import the PDF file to Rack2-Filer using the usual procedure.
[Problem]
When trying to import a file, the "Creating image data from source file. Please
wait." message appears, but the file is not imported.
An associated application of the file to be imported shows the windows
(e.g. print window) behind Rack2-Filer. Check whether the window
appears in the Windows taskbar. If it exists, click the window to be
displayed to the top and click the [OK] button and so on.
Rack2-Filer User's Guide
| 415