Using S300/S510/S500 With Rack2-Filer; Specifying The Application In Scansnap Manager - Fujitsu PFU Rack2-Filer User Manual

5.2
Using S300/S510/S500 with
Rack2-Filer
There are two ways to enable the use of ScanSnap S300/S510 with Rack2-
Filer.

• Specifying the application in ScanSnap Manager

• Using the Quick Menu
To enable the use of ScanSnap S500 with Rack2-Filer, specify the application
in ScanSnap Manager.
Specifying the application in ScanSnap
Manager
This section describes how to enable the use of ScanSnap S300/S510/S500 by
specifying the application in ScanSnap Manager.
• The following settings in the "ScanSnap Manager - Scan
and Save Settings" window will be disabled.
- Rename file after scanning
- "Color high compression" in the [Color mode] setting on
the [Scanning] tab
• If scanning with S300/S510/S500, the following setting is
recommended. On the [Scanning] tab, select the [Option]
button. Then on the [Read mode option] dialog box that
appears, uncheck the "Allow automatic image rotation"
checkbox.
Rack2-Filer User's Guide
| 75