Fujitsu PFU Rack2-Filer User Manual page 438

Chapter 13 Messages
Program could not save data file because the maximum number of
pages (xxx) has been reached. Reduce the number of pages and try
again.
Solution
The layout could not be changed because the maximum number of
pages (XXX) has been reached.
Delete any unnecessary pages, and try again.
Solution
438 |
Rack2-Filer User's Guide
Delete unnecessary pages so that the number of pages does
not exceed the maximum after import, and import again.
For xxx, the maximum number of pages selected in "Max
Binder Size" in the [General] tab of the Rack2-Filer [Binder
Settings] dialog box is displayed. Either of the following
values is displayed depending on the setting of the dialog
box:
When "250 sheets (500 pages)" is selected: 500
When "500 sheets (1000 pages)" is selected: 1000
If the layout pattern is changed in the [Layout Settings] dialog
box to a setting that allocates a small number of photos or
documents on a page, a new page may be added to allocate
the imported photos or documents. With this process, the
maximum number of pages may be reached.
In this case, reduce the number of pages for which the layout
is changed or remove unnecessary pages, and try again.
For xxx, the maximum number of pages selected in "Max
Binder Size" in the [General] tab of the Rack2-Filer [Binder
Settings] dialog box is displayed. Either of the following
values is displayed depending on the setting of the dialog
box:
When "250 sheets (500 pages)" is selected: 500
When "500 sheets (1000 pages)" is selected: 1000