Fujitsu PFU Rack2-Filer User Manual page 425

No LibRoot folders are set to be shown.
Check the settings.
Solution You cannot set all LibRoot folders to be hidden.
[Show contents of the LibRoot] must be selected for at least
one LibRoot folder.
Program error.
Restart the system and try again.
Solution Restart the system and try again.
Program could not move data file because the maximum number of
pages (xxx) has been reached.
Reduce the number of pages and try again.
Solution If the pages of the selected pages are moved to a binder, the
maximum number of pages allowed for the destination binder
will be exceeded. Reduce the number of pages to be moved,
or delete any unneeded pages from the destination binder,
and try again.
For xxx, the maximum number of pages selected in "Max
Binder Size" in the [General] tab of the Rack2-Filer [Binder
Settings] dialog box is displayed. Either of the following
values is displayed depending on the setting of the dialog
box:
When "250 sheets (500 pages)" is selected: 500
When "500 sheets (1000 pages)" is selected: 1000
Unable to execute because the same operation is already running.
Please wait for the other process to complete and try again.
Solution After the process is completed, try again.
Rack2-Filer User's Guide
| 425