Fujitsu PFU Rack2-Filer User Manual page 72

Chapter 5 Using the ScanSnap with Rack2-Filer
5.
To change the settings in "Scan to Rack2-Filer", select
[Settings] from
If the settings do not need to be changed, proceed to Step 8.
6.
Specify the scanned data storage destination.
72 |
Rack2-Filer User's Guide
The following settings window appears.
- WorkArea
Saves scanned data into the WorkArea of Rack2-Filer.
"Request confirmation each time" checkbox
A confirmation window appears when saving the data in the
WorkArea.
[OK] button:
[Cancel] button: Cancels saving the data.
- Binder currently selected in the Rack2-Filer window
Saves the scanned data into the binder selected in the Rack2-Filer
window.
- Binder selection dialog for individual assignment every time
Binder selection dialog box for individual assignment is displayed
every time.
.
Saves the data in the WorkArea.