Fujitsu PFU Rack2-Filer User Manual page 111

5.
Click the [OK] button.
Binder settings are changed in accordance with the specified contents.
• Click the [Help] button in the dialog box to refer to the
"Rack2-Filer Help" pages for the details of each item.
• A password can be added to binder. To set a
password, type the same password for the "Password/
Confirm" fields on the [General] tab. This password is
required when opening or editing the file. Make sure to
remember the password.
• The design of the binder spine label can be changed.
• A spine image from ScanSnap (S1100, S1300, S1500,
S300, S510, S500) can be used as a binder spine. To
avoid obstruction of the binder spine image, you can
choose to hide the binder title and reference codes. For
details, refer to "6.16 Adding an Image Imported from
ScanSnap to a Binder Spine" (Page 112).
If using a scanner other than ScanSnap models
described above, save the scanned image as a file,
and use it as the binder spine image.
For details, refer to "6.17 Adding an Image to a Binder
Spine" (Page 115).
• The following types of images can be added to the
spine of the binder:
- bmp
- jpg
- png
- pdf (PDF files exported from Rack2-Filer or imported
using the ScanSnap)
For details, refer to "6.17 Adding an Image to a
Binder Spine" (Page 115).
• The following items can be specified as search
conditions when searching for binders.
- Binder Title
- RefCode#n
- Memo Tags
Rack2-Filer User's Guide
| 111