Adding An Image Imported From Scansnap To A Binder Spine - Fujitsu PFU Rack2-Filer User Manual

Chapter 6 Rack2-Filer Window Operations
6.16 Adding an Image Imported from
ScanSnap to a Binder Spine
This section describes how to add an image to the binder spine from ScanSnap
(S1100, S1300, S1500, S300, S510, S500)
1.
112 |
Rack2-Filer User's Guide
An image can be scanned and added to a binder scan using
the following scanners.
• S1100
• S300
Support services are no longer available for the following
scanner models.
• fi-5110EOX2
• fi-5110EOX
If using a scanner other than ScanSnap models described
above, save the scanned image as a file and then use it as the
binder spine image.
For details, refer to "6.17 Adding an Image to a Binder Spine"
(Page 115).
Select the binder for which the spine is to be changed.
.
• S1300 • S1500
• S510 • S500