Fujitsu PFU Rack2-Filer User Manual page 160

Chapter 7 Rack2-Viewer Window Operations
160 |
Rack2-Filer User's Guide
• For a card binder, you can select the maximum number of
cards per page (either 4 or 8).
This can be set in the [Card Binder] tab of the [Rack2-
Viewer Settings] dialog box.
• For a card binder, imported card data will be added
sequentially from the left and top in the target page. If the
front is filled up of card data, cards will be added to the
back. When the maximum number of cards per page is set
to 4 and the left line of the back is filled up, a new card
sheet is added so that cards can continue to be inserted.
• When scanning cards by flatbed scan, scan settings can
be set on the [Card Binder] tab in the [Rack2-Viewer
Settings] dialog box.
• When scanning cards with ADF, the scan size of TWAIN
driver will be changed to "Card Size" automatically.
• For a portrait card, scanned data rotated 90 degrees to the
right will be displayed.
• For an over-sized card, the card is cropped automatically
to extract the main data.