Fujitsu PFU Rack2-Filer User Manual page 410

Chapter 12 Troubleshooting
[Problem]
The "Raku2 ImageWriter could not be installed." message appears when
Rack2-Viewer was installed. Also, files with the exception of image files
cannot be imported.
410 |
Rack2-Filer User's Guide
Follow the steps below to install the "Raku2 ImageWriter"
(The names of the buttons and options may vary according to
operating systems).
1. Restart your computer.
2. On the [Start] menu, select [Control Panel] - [Printers and
Faxes], and click [Add Printer].
The Add Printer Wizard window appears.
3. Select "Local Printer" and click the [Next] button.
4. In the "Select the Printer Port" window, select "Use the
following port" and select "LPT1: (recommended printer port)"
or "Raku2Port" from the port list.
5. Click the [Next] button.
6. Click the [Have Disk] button in the "Add Printer Wizard"
window, and select the file in the folder where Rack2-Viewer is
installed (C:\Program Files\PFU\Rack2\).
• For Windows XP or Windows 2000
RkImageWriter\ForWin2000Xp\RkImageWriter2k.inf
• For Windows Vista (32-bit version) or Windows 7 (32-bit
version)
RkImageWriter\ForVista\RkImageWriter2k.inf
• For Windows Vista (64-bit version) or Windows 7 (64-bit
version)
RkImageWriter\ForVista64\RkImageWriter64.inf
7. Proceed by following the screen prompts.
8. Click the [Continue] button when the hardware installation
window appears.
This adds "Raku2 ImageWriter" to the list of printers.