Fujitsu PFU Rack2-Filer User Manual page 418

Chapter 12 Troubleshooting
[Problem]
The data conversion to Microsoft Word/Excel/PowerPoint is extremely bad.
418 |
Rack2-Filer User's Guide
Check that pages be to output to Microsoft Word/Excel/PowerPoint are
the following types:
- Pages are not scanned using the ScanSnap.
- Pages are not saved for Rack2-Filer version 4.0 or later.
- Pages inserted when the ScanSnap setting [Generate one PDF
file per {x} page(s)] is "ON".
The ScanSnap mark is displayed on pages that can be output to
Microsoft Word/Excel/PowerPoint.
From [Output to Office] - [Show ScanSnap Mark], check that [Show
ScanSnap Mark] is selected to show the ScanSnap mark.
If the mark is not displayed, scan documents again using ScanSnap
and save for Rack2-Filer version 4.0 or later.
If the pages cannot be output to Microsoft Word/Excel/PowerPoint
even if the mark is displayed, ABBYY FineReader for ScanSnap may
not be installed.
If so, install ABBYY FineReader for ScanSnap.
For ScanSnap S1100/S1300/S1500/S510, ABBYY FineReader for
ScanSnap is provided with ScanSnap.
For ABBYY FineReader for ScanSnap, the latest update is required.