Adding The Extra Target Devices To The Top Menu File - Fujitsu ETERNUS User Manual

Chapter 2 Setup
> 2.5 Monitoring Multiple Target Devices
2
3
4
2.5.3

Adding the Extra Target Devices to the Top Menu File

When monitoring multiple target devices, edit the Top Menu file as follows.
Note that if the target device is other than ETERNUS2000, each target address must have either
"/login.htm" or "/login_jp.htm" added to the end.
The following example uses a configuration with two ETERNUS3000s and one ETERNUS2000
to show how the top menu file should be edited to allow all three devices to be monitored. The
top menu file should be edited in the same way when monitoring other devices.
[Example]
• 1st Target Device (ETERNUS3000#1)
• 2nd Target Device (ETERNUS2000#1)
• 3rd Target Device (ETERNUS3000#2)
P2X0-0202-04ENZ0 ETERNUS Disk storage systems ETERNUSmgr User Guide -Introduction-
Copy an existing setup file.
Example: STXPOLL_1.INI
Change the name of the copied file.
Setup file names must start with "STX" and end with ".INI".
Example: STXPOLL_2.INI
Edit the copied file. (The STXPOLL_2.INI file is used here.)
Use a text editor such as Note Pad to edit the copied files.
Refer to "2.3 Setting Items" (page 18)
changed in the new setup file.
"_stxpoll.ini" is provided as a model file. If you copy this file to make a
new setup file, be sure to keep the original file as is.
Target Address = http://000.000.000.001
Alarm History Files URL = domain-name/eternusmgr/ETERNUS3000_1
Target Address = http://000.000.000.002
Alarm History Files URL = domain-name/eternusmgr/ETERNUS2000_1
Target Address = http://000.000.000.003
Alarm History Files URL = domain-name/eternusmgr/ETERNUS3000_2
for details of how and which parameters should be
36
End of procedure
Copyright 2009 FUJITSU LIMITED