Event Notification; Table 4.1 General Status Of Eternus Web Gui - Fujitsu Eternus DX80 S2 User Manual

Chapter 4 Operations
4.2 Monitoring ETERNUS DX Disk Storage System Status
Table 4.1
Status of each component in the ETERNUS DX Disk storage system is monitored periodically,
and the result is displayed as a general status image with character strings.
Table 4.1
Refer to "ETERNUS Web GUI User's Guide" for details.
4.2.3

Event Notification

By setting event notification, if an error (event) occurs in the ETERNUS DX Disk storage system,
the event information is notified.
The methods that can be used to notify an event are "e-mail", "SNMP Trap", "syslog", "remote
support", and "host sense". Note that REMCS is not available in the EMEA&I region.
For the procedure on setting event notification, refer to "ETERNUS DX80 S2/DX90 S2 Disk
storage system User's Guide -Installation-".
■
E-mail
When an event occurs in the ETERNUS DX Disk storage system, an e-mail is sent to the speci-
fied e-mail address.
For more details on notified event information, refer to
List" (page
■
SNMP Trap
When an event occurs in the ETERNUS DX Disk storage system, an SNMP Trap is sent to the
SNMP Manager (monitoring server).
For more details on event information notified by SNMP Trap, refer to
Notification Message List" (page
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
shows the general status.
General status of ETERNUS Web GUI
General status
Normal (Green
Not Ready (Red)
Error (Red)
Maintenance (Orange)
Warning (Yellow)
90).
90).
Copyright 2011 FUJITSU LIMITED
ETERNUS DX Disk storage system status
The ETERNUS DX Disk storage system is in normal state.
"Not Ready" is a status where an abnormality is detected at a
power-off, and I/O access from the host cannot be received.
The ETERNUS DX Disk storage system is in error state.
The ETERNUS DX Disk storage system is under maintenance.
The ETERNUS DX Disk storage system is in warning state.
"Appendix A Event Notification Message
51
"Appendix A Event
P3AM-4842-01ENZ0