Installable Host Interfaces; Host Interface Handling Instructions; Figure 5.4 Installation Diagram For Host Interface Adapters (Dual-Controller Type); Table 5.4 Installable Host Interfaces - Fujitsu Eternus DX80 S2 User Manual

Chapter 5 Installing Optional Products
5.3 Installing Host Interfaces
■
For a dual-controller type
Figure 5.4
5.3.2

Installable Host Interfaces

Table 5.4
Table 5.4
Model name
ETEHF12-L
ETEHX12-L
ETEHL12-L
ETEHS12-L
ETEHC12-L
At time of purchase, the installable host interface model may be different from those described.
To find the web-site to check the latest version of this manual, refer to "Read Me First".
5.3.3

Host Interface Handling Instructions

■
About condensation
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
Host interface adapter 1 (CA#1)
Controller 0 (CM#0)
Installation diagram for host interface adapters (dual-controller type)
shows the installable host interfaces.
Installable host interfaces
Host interface for DX80 S2/DX90 S2 (FC, 2port)
Host interface for DX80 S2/DX90 S2 (10Gbit/s, iSCSI, 2port)
Host interface for DX80 S2/DX90 S2 (1Gbit/s, iSCSI, 2port)
Host interface for DX80 S2/DX90 S2 (SAS, 2port)
Host interface for DX80 S2/DX90 S2 (FCoE, 2port)
Do
CAUTION
• When moving a host interface adapter from a cold place, such as
an un-conditioned store house in winter, to a warmer place such as
an air-conditioned room, the severe temperature change may
result in condensation forming.
To avoid this, allow the packed host interface adapter sufficient
time in the warmer place (one hour for each 15°C of temperature
difference) to adapt to the new temperature.
Copyright 2011 FUJITSU LIMITED
Expansion
Product name
77
Host interface adapter 1 (CA#1)
Expansion
Controller 1 (CM#1)
P3AM-4842-01ENZ0