Fujitsu Eternus DX80 S2 User Manual page 56

Chapter 5 Installing Optional Products
5.1 Installing Drives
■
About static electricity
■
About shock
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
Do Not
CAUTION
• Do not touch the surface of the board of the drives.
Do
• When handling drives, make sure to wear a wrist strap or touch a
metal part to discharge the human body's natural static electricity.
Failure to discharge static electricity may cause device failure.
• Leave the drive in its package until ready to install it.
Do Not
CAUTION
• Do not lay the drives directly on a desk or similar hard surface.
Always use a rubber mat or other soft material to cushion the drives
against physical shocks.
• Do not stack drives or stand drives on end.
• Do not apply external force to the interface connectors.
• Do not knock or drop the drives on hard objects.
Copyright 2011 FUJITSU LIMITED
56
P3AM-4842-01ENZ0