Chapter 3 Setup; Thin Provisioning Setup; Registering The Thin Provisioning License - Fujitsu Eternus DX80 S2 User Manual

Chapter 3
This chapter describes the required settings for operation of the ETERNUS DX Disk storage
system and provides notes for setting up each function of the ETERNUS DX Disk storage
system. Note that the Thin Provisioning function cannot be used for a single-controller type.
3.1

Thin Provisioning Setup

To use the Thin Provisioning function, register the Thin Provisioning license in the ETERNUS DX
Disk storage system and set up the Thin Provisioning function.
For details on the usage and overview of Thin Provisioning, refer to "ETERNUS DX80 S2/DX90
S2 Disk storage system Overview".
3.1.1

Registering the Thin Provisioning License

■
For the EMEA&I region
After the Thin Provisioning Feature License is purchased, it is activated by registering a Thin
Provisioning Feature license key in the ETERNUS DX Disk storage system.
When purchasing the Thin Provisioning Feature, a Transaction Authentication Number (TAN)
and the URL of the web-site from which the license key may be obtained are notified by E-mail.
■
For regions other than EMEA&I
When the Thin Provisioning Feature License is purchased separately, register the Thin Provi-
sioning license in the ETERNUS DX Disk storage system.
For details on how to register the license, refer to the "Feature activation licenses" document that
is provided with the Thin Provisioning Feature License.
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
Setup
Copyright 2011 FUJITSU LIMITED
40
P3AM-4842-01ENZ0