Fujitsu Eternus DX80 S2 User Manual page 113

Appendix A Event Notification Message List
A.2 Message List
Event type
M 21810xxx
M E0050xxx
M E10300xx
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
SNMP Trap
Trap
Trap
code
Maintenance
No.
Info
7 21810xxx
7 E0050xxx
7 E10300xx
Copyright 2011 FUJITSU LIMITED
Upper: Message
Lower: Description
RAID Group#0xxx recovered end of Rebuild processing
Rebuilding to a hot spare or a replaced disk is complete,
but Bad Data (data lost identifier) exists.
xxx: RAID group number
WRITE BAD DATA
Writing of Bad Data (data lost identifier) occurs.
xxx: RAID group number
PINNED DATA was created CM#m-CPU#v
Pinned Data occurs.
xx: CM module ID in which Pinned Data occurred
m: CM number in which Pinned Data occurred
v: CPU number in CM
113
Remarks
These mes-
sages are noti-
fied when
"Rebuild com-
plete (BAD
DATA)" is
enabled for Error
Severity Level in
the event notifi-
cation setting.
They are not noti-
fied during main-
tenance
operations.
These mes-
sages are noti-
fied when "BAD
DATA occurs" is
enabled for Error
Severity Level in
the event notifi-
cation setting.
They are not noti-
fied during main-
tenance
operations.
These mes-
sages are noti-
fied when
"PINNED DATA
occurs" is
enabled for Error
Severity Level in
the event notifi-
cation setting.
They are not noti-
fied during main-
tenance
operations.
P3AM-4842-01ENZ0