Installing Host Interfaces; Installation Rules For Host Interfaces; Figure 5.3 Installation Diagram For A Host Interface Adapter (Single-Controller Type) - Fujitsu Eternus DX80 S2 User Manual

Chapter 5 Installing Optional Products

5.3 Installing Host Interfaces

5.3 Installing Host Interfaces
Optional host interfaces can be installed while the ETERNUS DX Disk storage system is running
without affecting the system.
5.3.1

Installation Rules for Host Interfaces

This section explains the installation rules for host interfaces.
One or two host interface adapters that have two host interface ports can be installed for each
controller.
Figure 5.3
Install the host interface adapters for CA#0 first, and then CA#1. Host interface adapters that
have different interfaces can be installed in CA#0 and CA#1.
For a dual-controller type, the configuration is the same for Controller 0 (CM#0) and Controller 1
(CM#1).
■
For a single-controller type
Figure 5.3
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
Do Not
CAUTION
• Do not uninstall or move a host interface that is already installed.
Contact your sales representative or maintenance engineer if a host
interface needs to be uninstalled or moved.
Do
• Contact your maintenance engineer when a host interface adapter is
installed in the channel adapter (CA#1) of the ETERNUS DX80 S2/
DX90 S2.
and Figure 5.4 show the installation diagrams for host interface adapters.
Host interface adapter 1 (CA#1)
Controller 0 (CM#0)
Installation diagram for a host interface adapter (single-controller type)
Copyright 2011 FUJITSU LIMITED
Expansion
76
P3AM-4842-01ENZ0