Product, Model, And Part Number Mapping - Polycom SIP 3.1 Administrator's Manual

Administrator's Guide SoundPoint IP / SoundStation IP

Product, Model, and Part Number Mapping

C - 26
In SIP 2.1.2, enhancements to the master configuration file were made to allow
you to direct phone upgrades to a software image and configuration files
based on phone model number, firmware part number, or MAC address.
The part number specific version has precedence over the model number
version, which has precedence over the original version. For example,
CONFIG_FILES_2345-11605-001="phone1_2345-11605-001.cfg,
sip_2345-11605-001.cfg" will override
CONFIG_FILES_SPIP601="phone1_SPIP601.cfg, sip_SPIP601.cfg", which will
override CONFIG_FILES="phone1.cfg, sip.cfg" for an SoundPoint IP 601.
You can also add variables to the master configuration file that are replaced
when the phone reboots. The variables include PHONE_MODEL,
PHONE_PART_NUMBER, and PHONE_MAC_ADDRESS.
The following table shows the product name, model name, and part number
mapping for SoundPoint IP and SoundStation IP phones:
Product Name
SoundPoint IP 301
SoundPoint IP 320
SoundPoint IP 330
SoundPoint IP 430
SoundPoint IP 501
SoundPoint IP 550
SoundPoint IP 560
SoundPoint IP 600
SoundPoint IP 601
SoundPoint IP 650
SoundPoint IP 670
SoundStation IP 4000
SoundStation IP 6000
SoundStation IP 7000
Model Name
SPIP301
SPIP320
SPIP330
SPIP430
SPIP501
SPIP550
SPIP560
SPIP600
SPIP601
SPIP650
SPIP670
SSIP4000
SSIP6000
SSIP7000
Product Part Number
2345-11300-001
2345-12200-002,
2345-12200-005
2345-12200-001,
2345-12200-004
2345-11402-001
2345-11500-030,
2345-11500-040
2345-12500-001
2345-12560-001
2345-11600-001
2345-11605-001
2345-12600-001
2345-12670-001
2101-06642-001
3111-15600-001
3111-40000-001