Table of Contents
Advertisement
Multiple boot servers can be configured by having the boot server DNS name
map to multiple IP addresses. The default number of boot servers is one and
the maximum number is eight. HTTPS, HTTP, and FTP are supported for
redundant boot servers.
For all SoundPoint IP and SoundStation IP phones, follow the normal
provisioning process in the next section,
have decided to daisy-chain two SoundStation IP 7000 conference phones
together, read the information in
Using CLink
available.
Provisioning Phones
To deploy phones from the boot server:
For more information on encrypting configuration files, refer to
Note
Configuration Files
1. (Optional) Create per-phone configuration files by performing the
following steps:
Note
This step may be omitted if per-phone configuration is not needed.
Obtain a list of phone Ethernet addresses (barcoded label on
a
underside of phone and on the outside of the box).
Create per-phone phone[MACaddress].cfg file by using the
b
phone1.cfg file from the distribution as templates.
For more information on the phone1.cfg file, refer to
Configuration
Throughout this guide, the terms Ethernet address and MAC address are used
Note
interchangeable.
Edit contents of phone[MACaddress].cfg if desired.
c
For example, edit the parameters.
Provisioning SoundStation IP 7000 Phones
on page
3-18
to understand the different provisioning options
on page C-4.
on page A-106.
Setting up Your System
Provisioning
Phones. However, if you
Encrypting
Per-Phone
3 - 15
Advertisement
Table of Contents
