Table of Contents
Advertisement
Administrator's Guide SoundPoint IP / SoundStation IP
Note
3 - 16
2. (Optional) Create new configuration file(s) in the style of sip.cfg by
performing the following steps:
For more information on why to create another configuration file, refer to the
"Configuration File Management on SoundPoint IP Phones" whitepaper at
www.polycom.com/support/voice/
For more information, especially on the SIP server address, refer to
<SIP/>
on page A-10.
For more information on the sip.cfg file, refer to
Configuration
on page A-4.
Most of the default settings are typically adequate, however, if SNTP
settings are not available through DHCP, the SNTP GMT offset and
(possibly) the SNTP server address will need to be edited for the correct
local conditions. Changing the default daylight savings parameters will
likely be necessary outside of North American locations.
(Optional) Disable the local web (HTTP) server or change its
a
signalling port if local security policy dictates.
Change the default location settings for user interface language and
b
time and date format.
3. (Optional) Create a master configuration file by performing the following
steps:
Create per-phone or per-platform <Ethernet address>.cfg files by
a
using the 00000000000.cfg and files from the distribution as templates.
For more information, refer to
A-2.
Edit the CONFIG_FILES attribute of the <Ethernet address>.cfg files
b
so that it references the appropriate phone[MACaddress].cfg file.
For example, replace the reference to phone1.cfg with
phone[MACaddress].cfg.
.
Application
Master Configuration Files
SIP
on page
Advertisement
Table of Contents
