Polycom SIP 3.1 Administrator's Manual page 258

Administrator's Guide SoundPoint IP / SoundStation IP
Attribute
softkey.x.use.alerting
softkey.x.use.dialtone
softkey.x.use.proceeding
softkey.x.use.setup
softkey.x.use.hold
softkey.feature.newcall
softkey.feature.endcall
softkey.feature.split
softkey.feature.join
softkey.feature.forward
A - 104
Permitted
Values Default
0 (default) Null
1
0 (default) Null
1
0 (default) Null
1
0 (default) Null
1
0 (default) Null
1
0 Null
1 (default)
0 Null
1 (default)
0 Null
1 (default)
0 Null
1 (default)
0 Null
1 (default)
Interpretation
If set to 0 or Null, the soft key is not
displayed in the alerting state.
If set to 1, the soft key is displayed in the
alerting state.
If set to 0 or Null, the soft key is not
displayed in the dialtone state.
If set to 1, the soft key is displayed in the
dialtone state.
If set to 0 or Null, the soft key is not
displayed in the proceeding state.
If set to 1, the soft key is displayed in the
proceeding state.
If set to 0 or Null, the soft key is not
displayed in the setup state.
If set to 1, the soft key is displayed in the
setup state.
If set to 0 or Null, the soft key is not
displayed in the hold state.
If set to 1, the soft key is displayed in the
hold state.
If set to 0, the New Call soft key is not
displayed when there is another way to
place a call.
If set to 1 or Null, the New Call soft key is
displayed.
If set to 0, the End Call soft key is not
displayed.
If set to 1 or Null, the EndCall soft key is
displayed.
If set to 0, the Split soft key is not
displayed.
If set to 1 or Null, the Split soft key is
displayed.
If set to 0, the Join soft key is not
displayed.
If set to 1 or Null, the Join soft key is
displayed.
If set to 0, the Forward soft key is not
displayed.
If set to 1 or Null, the Forward soft key is
displayed.