Configuring Soundpoint Ip / Soundstation Ip Phones Locally - Polycom SIP 3.1 Administrator's Manual

Central
(boot server)

Configuring SoundPoint IP / SoundStation IP Phones Locally

Local Web
Server Access
Local Settings
Menu Access
For more information on encrypting configuration files including determining
whether an encrypted file is the same as an unencrypted file and using the
SDK to facilitate key generation, refer to
page C-4.
Configuration changes can performed centrally at the boot server:
Configuration File: Specify the phone-specific contact directory and the
sip.cfg phone-specific configuration override file.
•
Configuration file: Change the encryption key.
<device>.cfg
•
A local phone-based configuration web server is available, unless it is disabled
through sip.cfg. It can be used as the only method of modifying phone
configuration or as a distributed method of augmenting a centralized
provisioning model. For more information, refer to
page A-63.
The phone's local user interface also permits many application settings to be
modified, such as SIP server address, ring type, or regional settings such as
time/date format and language.
Point your web browser to http://<phoneIPAddress>/.
Configuration pages are accessible from the menu along the top banner.
The web server will issue an authentication challenge to all pages except for
the home page.
Credentials are (case sensitive):
User Name: Polycom
Password: The administrator password is used for this.
Some items in the Settings menu are locked to prevent accidental changes.
To unlock these menus, enter the user or administrator passwords.
The administrator password can be used anywhere that the user password is
used.
Factory default passwords are:
User password: 123
Administrator password: 456
Encrypting Configuration Files
For more information, refer to
on page A-89.
For more information, refer to refer to
Configuration on page A-124.
Configuring Your System
on
Encryption <encryption/>
Flash Parameter
Web Server <httpd/>
4 - 83
on