Polycom SIP 3.1 Administrator's Manual page 281

Name
device.syslog.facility
device.syslog.renderLevel
device.syslog.prependMac
device.em.power
device.net.etherVlanFilter
device.net.etherStormFilter
device.serial.enable
device.sec.SSL.certList
device.sec.SSL.customCert
Possible Values
0 to 23
0 to 6
Enabled, Disabled
Enabled, Disabled, Null
Enabled, Disabled
Enabled, Disabled
0,1
all, custom, default
X.509 certificate
Description
A description of what generated the log message.
For more information, refer to section 4.1.1 of RFC
3165.
The default value is 16, which maps to "local 0".
Specifies the lowest class of event that will be
rendered to syslog. It is based on
log.render.level and can be a lower value.
Refer to Basic Logging <level/><change/> and
<render/> on page A-86.
If enabled, the phone's MAC address is prepended
to the log message sent to the syslog server.
Refer to the EM Power parameter in
page 3-6.
Refer to the VLAN Filtering parameter in
Menu on page 3-11.
Refer to the Storm Filtering parameter in
Menu on page 3-11.
Enables the debug serial port.
The default value is 1.
The type of certificate list.
The certificate value.
Configuration Files
Main Menu on
Ethernet
Ethernet
A - 127