Pair A Previously Paired Realpresence Touch Device; Calling; Call By Entering A Number; Accept A Call - Polycom RealPresence Group Series User Manual

Pair a Previously Paired RealPresence Touch Device

If your connection to a paired RealPresence Group Series system is lost, you need to pair to that system
again.
Procedure
1. After the system is unpaired, you might see a "Searching" message as the device tries to pair
automatically. To pair the device manually, tap Cancel.
2. On the Recently Paired tab, tap the RealPresence Group Series system that you want to pair.
The pairing connection begins.

Calling

In a Microsoft environment using a RealPresence Touch device as your system controller, you can place
an audio-only call or start a Skype meeting.

Call by Entering a Number

You can place an audio-only or video call from the dial pad.
Procedure
1. From the Home screen, tap
2. Do one of the following:
▪ Tap to switch to audio.
▪ Tap to switch to video.
3. Using the keypad, enter your contact's number.
4. Tap Call.

Accept a Call

Unless your system is configured to answer calls automatically, answer the call manually.
Procedure
» Tap Accept.

Decline a Call

If you are busy and do not want to accept an incoming call, you can decline the call.
» Tap Decline.

Accept or Decline Incoming Calls Forwarded from a Contact

When a call is forwarded to the system from a contact using the Skype for Business client, you can
choose to accept or decline the forwarded call. When you receive a forwarded incoming call, a notification
displays letting you know who the call is from and who forwarded the call.
You cannot forward calls from the RealPresence Group Series system to another system or the Skype for
Business client. You can only receive and respond to calls forwarded to the system.
®
Using a Polycom RealPresence Touch
Dial Pad.
™
Device with Skype for Business
7