Polycom SIP 3.1 Administrator's Manual page 221

Attribute
call.shared.disableDivert
call.shared.seizeFailReorder
call.shared.oneTouchResume
call.shared.exposeAutoHolds
Attribute
call.hold.localReminder.enabled
call.hold.localReminder.period
call.hold.localReminder.startDelay
Shared Calls <shared/>
This configuration attribute is defined as follows:
Permitted
Values Default
0, 1 1
0, 1 1
0, 1 0
0, 1 0
Hold, Local Reminder <hold/><localReminder/>
This configuration attribute is defined as follows:
Permitted
Values
0, 1
non-negative
integer
non-negative
integer
Interpretation
If set to 1, disable diversion feature for shared
lines.
Note: This feature is disabled on most call
servers.
If set to 1, play re-order tone locally on shared
line seize failure.
If set to 1, when a shared line has a call on hold
the remote user can press that line and resume
the call. If more than one call is on hold on the
line then the first one will be selected and
resumed automatically.
If set to 0, pressing the shared line will bring up
a list of the calls on that line and the user can
select which call the next action should be
applied to.
Note: This parameter affects the SoundStation
IP 4000, 6000, and 7000 phones. For other
phones a quick press and release of the line
key will resume a call whereas pressing and
holding down the line key will show a list of calls
on that line.
If set to 1, on a shared line, when setting up a
conference, a re-INVITE will be sent to the
server.
If set to 0, no re-INVITE will be sent to the
server.
Default Interpretation
0 If set to 1, periodically notify the local
user that calls have been on hold for
an extended period of time.
60 Time in seconds between subsequent
reminders.
90 Time in seconds to wait before the
initial reminder.
Configuration Files
A - 67