Polycom RMX 2000 Getting Started Manual page 26

Chapter 2-First Time Installation and Configuration
2-12
7
If you selected SIP, skip the following steps and go to Step 11.
8
Enter the required Gatekeeper information in the dialog box.
Table 2-4 Fast Configuration Wizard – Gatekeeper
Field
Gatekeeper
Primary Gatekeeper
IP Address or
Name
MCU Prefix in
Gatekeeper
Description
Select Specify to enable configuration of the
gatekeeper IP address.
When Off is selected, all gatekeeper options are
disabled.
Enter either the gatekeeper's host name (if a DNS
Server is used) or IP address.
Enter the string with which the MCU registers itself
with the gatekeeper.
The gatekeeper uses this string to identify the MCU
when forwarding calls to it.
H.323 endpoints use this number as the first part of
their dial-in string when dialing the MCU.