Polycom RMX 2000 Getting Started Manual page 28

Version 1.1

Hide thumbs Also See for RMX 2000:

Table of Contents

Chapter 2-First Time Installation and Configuration

2-14

Table 2-5

Fast Configuration Wizard – SIP Server

Field

SIP Server

SIP Server IP

Address

Transport Type

12 Click the Next button.

13 Enter the required System Flags information in the dialog box.

Description

Select Specify to enable SIP Server configuration.

When Off is selected, all SIP options are disabled.

Enter either the IP address of the preferred SIP

server or its host name (if a DNS server is used).

Select the protocol that is used for signaling between

the MCU and the SIP Server or the endpoints

according to the protocol supported by the SIP

Server:

UDP – Select this option to use UDP for signaling.

TCP – Select this option to use TCP for signaling.

Table of Contents