SATO CL408 Programming Reference Manual page 97

STORE 24X24 DOTS EXTERNAL CHARACTER
FUNCTION
Register external character of 24x24 dots in memory card.
FORMAT <ESC>T2abbn~n
EXAMPLE
OUTPUT
NOTES
E/Pro Programming Reference
Unit 4: Standard Command Codes
a = Data type =
H: Hex character
B: Binary code
b =
Registration font code address
<ESC>JIS
H: "21" to "7F" Up to 95 registries
B: 21H to 7FH Up to 95 registries
<ESC>Shift JIS
H: "40" to "9E" Up to 95 registries
B: 40H to 9EH Up to 95 registries
n = External character data
<ESC>A
<ESC>CC1
<ESC>T2H2100FF00FF
<ESC>Q2
<ESC>Z
External file 24 x 24
D1
D4
D7
D70
1. Existing data can be overwritten.
2. The Card Slot <ESC>CC command must be sent prior to this command.
3. An error may occur due to capacity shortage when this command and other
commands related to registration are used at the same time. In such a case,
you need to store the data on another card or replace the card with a card of
larger capacity.
4. Data will be out in the order as shown in the Output illustration above.
4-45
3C0000FF
D2 D3
D5 D6
D8 D9
D71 D72
PN: 9001096E