SATO CL408 Programming Reference Manual page 39

COMMAND QUICK REFERENCE
INSTRUCTION
IGa
I1abbb
J
Kab90cc
Laabb
LAa
LDa,b,c,d,e,f,g,i,jj
LFa
LHa
M
NC (EJ)
OA
E/Pro Programming Reference
Unit 3: Code Quick Reference
Sensor Type Selection. Selects the sensor type.
a = 0: Reflective (Eye-Mark) sensor
1: Transmissive (See-Thru) sensor
2: Sensor not used
IEEE1284. Specifies the receive mode and ACK width of IEEE1284.
a = Receive mode (Default: 0):
0: Multi item buffer
1: Single item buffer
b = ACK width: Valid range: 010 to 200 (1-50ns)
Journal Print. Provides the ability to print text line by line. Fixed spacing between lines and
characters.
Custom Designed Characters, Recall. Recalls for printing a custom character stored by
the Tabcc(data) command.
a = 1: 16 x 16 matrix
2: 24 x 24 matrix
b = Indicates the format that data stream was stored
B: Binary
H: Hexadecimal
cc = Memory location where the character was stored. Valid locations are 21
to 52 or "!" to "R" in hex values.
Character, Expansion. Expands characters in both directions.
aa = Multiple to expand horizontally (01 to 12)
bb = Multiple to expand vertically (01 to 12)
Language. Specifies the display language for the LCD.
a = 0: English
1: French
2: German
3: Spanish
4: Italian
5: Portuguese
User Download. Downloads a user defined set of Alternate Protocol Command Codes.
Online Feed. To enable or disable online label feed.
a = 0: Enables label feed when online
1: Disables label feed when online
Zero Slash. Allows printing zeroes with or without a slash.
a = 0: Prints zeroes without a slash
1: Prints zeroes with a slash
Font type. Specifies the 13W x 20H dot matrix font (includes descenders).
Eject and Cut. Cuts any printed labels that remain in the printer.
Font type. Specifies the OCR-A font.
DESCRIPTION
3-15
PN: 9001096E