SATO CL408 Programming Reference Manual page 41

COMMAND QUICK REFERENCE
INSTRUCTION
PMa
POabcc
#
#Ea
PR
PS
PYaaa
Qaaaaaa
RC
E/Pro Programming Reference
Unit 3: Code Quick Reference
Print Mode Selection. Selects desired backfeed operation.
a = 0: No backfeed, continuous operation
1: Tear-Off
2: Cut, backfeed after print
3: Cut, backfeed before print
4: Cut, no backfeed
7: Dispense, backfeed after print
8: Dispense, backfeed before print
Offset Specification. Specifies label stop position. Only applicable to the CT400/410
printers.
a = Offset specification
0: Cutter motion
1: Dispenser motion
2: Tear-Off motion
3: Continuous motion
b = Offset direction
+: Forward
-: Backward
c = Offset Distance (00 to 99 dots)
Start Position Specification. Specifies the vertical print start position. Only applicable to the
XL400/410e printers.
a = Shift direction
+: Forward
-: Backward
b = Shift distance
XL400e: 000 to 400 dots
XL410e: 000 to 600 dots
Print Darkness. Specifies a new print darkness setting.
Fixed Font Spacing. Returns the printer to fixed character spacing mode.
Proportional Font Spacing. Places the printer in the proportional character spacing mode.
Will not work with U Font.
PCX File, Recall. Recalls a PCX graphics file.
aaa = The storage number assigned to the file (001 to 999)
Print Quantity. Specifies the total number of labels to print.
aaaaaa = Total quantity of labels to print for the job (000001-999999)
Sheet Unit Cut Quantity Specification. Specifies the sheet cut quantity for small labels.
Only applicable to the M10e printer.
a = Number (01 to 99)
DESCRIPTION
3-17
PN: 9001096E