SATO CL408 Programming Reference Manual page 32

COMMAND QUICK REFERENCE
INSTRUCTION
BTabbccddee
BVa,b,c, ddddddddd,eee,
f f f,gg..g
BWaabbb
BXaabbccddeeefffghh
E/Pro Programming Reference
Unit 3: Code Quick Reference
Bar Codes. Variable Ratio. provides the ability to print a bar code with a ratio other than
those specified through the standard bar code commands (B, BD, and D).
a = Bar code option:
0: Codabar
1: Code 39
2: Interleaved 2 of 5
5: Industrial 2 of 5
6: Matrix 2 of 5
bb = Narrow space in dots (01-99)
cc = Wide space in dots (01-99)
dd = Narrow bar in dots (01-99)
ee = Wide bar in dots (01-99)
Maxicode. Prints 2-D Maxicode symbols per AIM I.S.S. specification.
a = Position of symbol within the set
b = Total number of symbols in the set
c = Mode
dd..d = 9 digit numeric Postal Code
eee = 3 digit numeric Country Code
f f f = 3 digit numeric Service Class
gg..g = Data, terminated by <ESC>
Bar Codes. Expansion. Works together with the BT command to specify an expansion factor
and the bar code height for the particular symbol being printed.
aa = Expansion factor by which the width of all bars and spaces is increased
(01 to 12)
bbb = Bar height by dot (004 to 999 dots)
Data Matrix. Data Format. Specifies the format of the Data Matrix 2-D symbology.
aa = Format ID (01 to 06, If ECC200 is selected (bb=20) this field is ignored
bb = Error correction level (00, 05, 08,10,14, 20 or 200. All other values
processed as 00
cc = Horizontal cell size (03 to 12 dots/cell)
dd = Vertical cell size (03 to 12 dots per cell)
eee = Cells per line. Use 000 for optimized symbol
fff = Cell lines. Use 000 to optimize
g = Mirror image
0: Normal Print
1: Reverse Print
hh = Guide cell thickness (01 to 15) 01 indicates normal type
DESCRIPTION
3-8
PN: 9001096E