Label Specification - SATO CL408 Programming Reference Manual

LABEL SPECIFICATION

FUNCTION
Temporarily specifies label specification. Only applicable to the CT400/410 printers.
FORMAT <ESC>YEa
Place immediately following the <ESC>A command.
EXAMPLE <ESC>A
<ESC>YE0
<ESC>Z
OUTPUT This command does not result in printer output.
NOTES
To change the setting value that is recorded in the printer, specify <ESC>PG or <ESC>PC commands.
E/Pro Programming Reference
Unit 4: Standard Command Codes
a = Label type
0: Adhesive label
1: Tag
4-135
PN: 9001096E