Counter Status (Me); Sensor Status (Sg) - SATO CL408 Programming Reference Manual

PARAMETERS
BYTE
20-21 HEX: 00 to 3E7
HEX: FFFF to FC19
22-23 HEX: 00 to 320
HEX: 00 to FCE0
24 HEX: 00 to 63
HEX: FF to 9D
25 HEX: 00 to 63
HEX: FF to 9D
26 HEX: 00 to 63
HEX: FF to 9D
27 HEX: 00 to 63
HEX: FF to 9D
28 Compatibility Mode
29 08 to 40
30 Buzzer

COUNTER STATUS (ME)

Receipt of SOH followed by ME causes the printer to return information bounded by an STX-ETX pair that reports
the operating status of the printer's life counters.
PARAMETERS
BYTE
1-8
9-12
13-16
17-20
21-24
25-28

SENSOR STATUS (SG)

Receipt of SOH followed by SG causes the printer to return information bounded by an STX-ETX pair that reports
the current operating status of the printer's sensors.
PARAMETERS
BYTE
1
2
E/Pro Programming Reference
Unit 6: Bi-Directional Communications
VALUE
Vertical Base Reference Point Offset (0 to 792 dots)
Vertical Base Reference Point Offset (-1 to -792 dots)
Horizontal Base Reference Point Offset (0 to 800 dots)
Horizontal Base Reference Point Offset (-1 to -800 dots)
Not Supported
Not Supported
Not Supported
Dispense Offset (0 to 99 dots)
Dispense Offset (-1 to -99 dots)
00: Enabled
01: Disabled
Not Supported
00: Enabled
01: Disabled
VALUE
HEX Current Life Counter in dots
HEX 1st (Current) Head Counter in dots
HEX 2nd (Previous) Head Counter in dots
HEX 3rd Head Counter in dots
HEX Not Supported
HEX Not Supported
VALUE
HEX Reflective Sensor Level
HEX Transmissive Sensor Level
DESCRIPTION
DESCRIPTION
DESCRIPTION
6-6
PN: 9001096E