SATO CL408 Programming Reference Manual page 182

WIRELESS LAN
EXAMPLE
Example 1: Setting all items:
<ESC>A
<ESC>WZF,0,1,192168001002,255255255000,192168001001,????????
<ESC>Z
Example 2: Setting to default:
<ESC>A
<ESC>WZD
<ESC>Z
Example 3: Setting specific items:
<ESC>A
<ESC>WZ4,255255255000
<ESC>Z
Example 4: To specify 0 character in password authentication:
<ESC>A
<ESC>WZ24,
<ESC>Z
Notes:
This command can be used with type 1 (USB, Serial) only.
Place this command between start code <ESC>A and stop code <ESC>Z.
This command may not be used in combination with other commands.
Setting can be printed on the factory test print.
The set parameter will become valid after rebooting.
When you reset to default, the values of Default settings will be used.
All or some parameter entities is omissible by using commas. However, commas are not omissible.
When specifying item number 24 or 25, by omitting set value, 0 character setting will be available.
OUTPUT Setting can be printed on the factory test print.
E/Pro Programming Reference
Unit 4: Standard Command Codes
4-130
PN: 9001096E