SATO CL408 Programming Reference Manual page 80

TELEGRAPHIC MESSAGE END SPECIFICATION
FUNCTION
Specifies the telegraphic message end relative to small labels. Only applicable to the M10e
printer.
FORMAT
<ESC>RE
Place after <ESC>A but before <ESC>Z.
EXAMPLE
<ESC>A
<ESC>RE0
<ESC>Z
OUTPUT
This command does not result in printer output.
NOTES
After receiving <ESC>RE, the editing of horizontal row will be ended and will conduct feed motion. As
printing may end in the middle of the horizontal row label due to the print quantity, the label may result
in being blank.
The <ESC>RE command specifies telegraphic ending of small label at the printer driver and cannot be
combined with other standard commands.
The feed motion becomes "0" when the cutter feature is not available.
E/Pro Programming Reference
Unit 4: Standard Command Codes
a = Operates when ending
0: Discharge motion
1: Discharge motion + Cut motion
4-28
PN: 9001096E