SATO CL408 Programming Reference Manual page 42

COMMAND QUICK REFERENCE
INSTRUCTION
RDabb,ccc,ddd,nn...n
REa
RFabn...n
RI
E/Pro Programming Reference
Unit 3: Code Quick Reference
Font Type. Specifies the internal AGFA raster fonts.
a = F: Specifies Futura font
P: Specifies CG Palcio font
S: CG Century Schoolbook font
G: CG Triumvirate Condensed font
V: CG Univers font
t: CG Times font
bb = 0: No character set
1: ISO 8859/1 Latin1
2: ISO 8859/2 Latin2
3: ISO 8859/9 Latin5
4: CP-737 DOSGreek
5: CP-885 DOS Cyrillic
6: CP-864 DOSArabic
8: PC-850 Multilingual
ccc = Horizontal Size (16 to 999 dots or P08 to P72 point size)
ddd = Vertical Size (16 to 999 dots or P08 to P72 point size)
nn..n = Data to be printed
Telegraphic Message End Specification. Specifies the telegraphic message end relative to
small labels. Only applicable to the M10e printer.
a = Operates when ending
0: Discharge motion
1: Discharge motion + Cut motion
Recall and Print of Font & Logo. Calls and prints font and logo downloaded with Label
Gallery's "GalleryMemMaster".
a = Font ID number (01 to 99)
b = Print digit (1 to 9999)
n = Print data
Label Size Specification. Specifies label dimensions. Only applicable to the M10e printer.
a = Sheet width (1500 to 3200 dots)
= Sheet length (480 to 3600 dots)
b
c = Label width (0 to 60 dots)
d = Label length (00 to 60 dots)
e = Small label width (480 to 3200 dots)
= Small label length (480 to 3600 dots)
f
g = Label width quantity (01 to 06)
h = Label length quantity (01 to 07)
DESCRIPTION
3-18
PN: 9001096E