SATO CL408 Programming Reference Manual page 131

2D32 (MICRO QR CODE)
NOTES
Binary specification is available for parameter k - its data designation command will vary.
Set parameter m when selecting binary.
When designating a parameter other than specified or when the print data quantity does not match,
printing will not be performed.
For data portion, data designation command varies depending on the parameter setting or the data
selected.
Data Setting 1: Auto or for binary 0: Manual = <ESC>DNmmmm,n...n.
Data Setting for parameters other than binary in 0: Manual =
Enter parameters followed by data. When entering more data, specify the data consecutively or printing
will not be properly performed.
The total print data size (n) is to 7000 bytes. The maximum data blocks that can be entered is 200.
Refer to Appendix: Reference Tables 35, 36, and 37 for additional information.
E/Pro Programming Reference
Unit 4: Standard Command Codes
<ESC>DS1,n...n (Numeric)
<ESC>DS2,n...n (Alphanumeric)
<ESC>DS3,n...n (Kanji)
4-79
PN: 9001096E