Ip Address Setting - SATO CL408 Programming Reference Manual

IP ADDRESS SETTING

FUNCTION
Specifies IP address.
FORMAT <ESC>W1
Place this command between <ESC>A start code and <ESC>Z stop code..
EXAMPLE
<ESC>A
<ESC>W1123220000040
<ESC>Z
OUTPUT
This command does not result in printer output.
Setting can be printed on the factory test print.
NOTES You cannot use this command in combination with other commands.
The set parameter will become valid after rebooting.
Default setting of IP address is as follows:
IP address: 000000000000
E/Pro Programming Reference
Unit 4: Standard Command Codes
a~a = IP address = 12 digits fixed
4-131
PN: 9001096E